Set your dryer controls for simultaneous filling and dumping of grain 24 hours a day.  Temperature sensors are monitored to accurately control the dumping of grain at predetermined moisture settings. •  Controls all functions of automatic roof (top) dryers •  Weather-tight control panel with clear cover for easy viewing of operations •  Continuous grain temperature display •  Includes stainless steel temperature probes All day to day functions are performed on the switches mounted on the exterior or the weather-tight control panel.  There is no need to open the panel door once the dryer con- trols have been set.  These features include: •  Fan and fan 2 start and stop switches •  Dryer control functions •  Burner on/off switch Dryer control operations can be easily monitored through the clear cover on the control panel The 4 line LCD visual display module informs the operator of all functions of the dryer including: •  time settings •   low grain, or full storage •  auger delay settings •   power out conditions •  fan heat errors An LED temperature display continuously informs the operator of the grain tem- perature.  Stainless steel temperature probes are available in sets of 2 or 4 sen- sors.  A simple set point menu is standard on all units. Monitor the grain level with inductive Paddle Switch A paddle switch is mounted at the top of the grain column.  This reliable, easy to maintain switch is also used below the drying fan/heater as a full storage monitor of the cooling and storage compartment of the grain bin. More from Moore Unbeatable 24 Hour Service and Repair Parts BIN-MOUNTED INDUCTIVE SWITCH BIN-MOUNTED PROXIMITY SENSOR FEEDLINE CONTROL AUTOMATIC DRYER CONTROL Provides continuous grain drying when used on automatic roof (top) dryer controls Two Year Warranty Toll Free: 1-877-767-6897 507-639-9031 411 Main St. E, Trimont, MN 56176